Welcome to the Polyguard Products, Inc. website for our
RG-2400™ family of products. If you have corrosion problems, especially
under insulation, you have come to the right place.
Our main focus for RG-2400™ has been the below ambient, under insulation
applications. Being a manufacturer of vapor barrier membranes (go to
www.polyguardproducts.com), we commonly hear of and see the problems
created by corrosion under insulation (CUI) and stainless steel stress
crack corrosion. RG-2400™ is designed for corrosion control, corrosion
prevention, and corrosion remediation without expensive surface preparation.
The RG-2400™ family
currently consists of 5 products, RG-2400™LT, RG-2400™AK, RG-2400™ET,
RG-2401™, and RG-1700™. RG-2400™LT is our standard product;
it is designed for installation in ambient temperatures onto cool surfaces.
RG-2400™AK is a modified product designed for installation in cold and
ambient temperatures onto hot surfaces; it is primarily used in the Alaskan
oil fields, applied in conditions as rough as -42° F on in service
piping that is approximately 160° F. RG-2400™ET is a modified version
for service on piping which will exceed 240° F in temperature, yet
be below 350° F. RG-2401™ is a modified product with a molecular
weight greater than water, specifically used ‘down hole’ in
oil wells to corrosion proof the annular space while causing any water
to
come to the surface during installation. RG-1700™ is a spray grade material
for temporary corrosion protection on equipment during transportation,
after arrival and installation, the equipment will be corrosion proofed
in whatever manner is designated by the end user.
RG-2400™ works
in two basic ways, one is by growing an engineered surface, or surface
conversion – creating
a surface which is unable to corrode even if moisture gets to it. The
other way RG-2400™ works, is by buffering
water vapor; as moisture passes through the gel, it is buffered to a
high pH which is alkaline enough not to corrode metal. The corrosion
process in our industry begins with water being the electrolyte that
initiates the corrosion process; other liquids and compounds can also
be the electrolyte. The moisture drive toward the pipe on below ambient
systems is our industry's major concern.
Today corrosion prevention is limited to corrosion coatings and paints
epoxy usually. If the surface preparation is not performed precisely,
this coating system will not last very long.
Though normally used
to control corrosion on tanks and vessels, corrosion on valves, corrosion
on fittings and piping systems, under insulation,
(on chilled water systems, ammonia systems, brine, glycol, LNG) RG-2400™ has
found other uses. Some of those uses include; down hole oil well corrosion,
corrosion on steam lines, corrosion on cyclical systems, corrosion
control on oil derrick piers, corrosion control on bridge rockers and
cabling, and for many general anti seize applications on bolts and flanges.
We are developing
a joint sealer for insulation joints which will buffer any moisture
vapor which
passes through the joints in insulation systems – better
protection for your expensive piping system.
Click the links to the left to navigate to items you are concerned about,
or just head straight to our literature or testing pages to download
product information sheets and test results.
One of the best things about this revolutionary product is that it is
environmentally benign!
