Glossary of Corrosion Related Terms

POLYGUARD PRODUCTS, INC.

	GLOSSARY OF TERMS "D"
THE SOLUTION TO CORROSION UNDER INSULATION
HOME \| LITERATURE \| TESTING \| GLOSSARY \| LINKS \| ABOUT US \| CONTACT US \| SITE MAP \| POLYGUARD WEBSITE

RG-2400 STOPS CORROSION	GLOSSARY OF CORROSION RELATED TERMS
RG-2400 will STOP existing corrosion and will prevent corrosion on new piping systems. Minimal surface preparation is required.

The Corrosion Process Science of Minetics/Surface Conversion Buffering Water Vapor Corrosion Under Insulation (CUI) Corrosion Control Corrosion Prevention Corrosion Remediation Priming and Painting Stainless Steel Stress Crack Corrosion (SCC) Corrosion on Steam Systems Corrosion on Tanks & Vessels Corrosion Anti-Seize Corrosion on Valves Corrosion Control in Natural Gas Vaults Corrosion Control on Bridges Corrosion Control on Marine & Oil Derek Pilings "Down Hole" Corrosion Control Insulation Joint Sealers Specialty Military Installations RG-2400 LT RG-2400 AK RG-2400 ET RG-2401 RG-1700 RG-2400 has many uses: Anti-Seize (Bolts) Bridge Rockers Steel Cable Steel Piers & Pilings Pig Doors Flange Bolts Unions	A \| B \| C \| D \| E \| F \| G \| H \| I \| J \| K \| L \| M \| N \| O \| P \| Q \| R \| S \| T \| U \| V \| W \| X \| Y \| Z
	D
	DEACTIVATION	The process of prior removal of the active corrosive constituents usually oxygen, from a corrosive liquid by controlled corrosion of expendable metal or by other chemical means, thereby making the liquid less corrosive.
	DEALLOYING	The selective corrosion of one or more components of a solid solution alloy, usually in the form of ions. Also called parting or selective leaching. See also decarburization, decobaltification, denickelification, dezincification, and graphitic corrosion.
	DEALUMINIZATION	The selective leaching or corrosion of a specific constituent (Al, Ni, Mo, Ni) from an alloy.
	DECARBURIZATION	Loss of carbon from the surface layer of a carbon-containing alloy due to reaction with one or more chemical substances in a medium that contacts the surface. See also dealloying.
	DECOBALTIFICATION	Corrosion in which cobalt is selectively leached from cobalt-base alloys, such as Stellite, or from cemented carbides. See also dealloying and selective leaching.
	DECOMPOSITION POTENTIAL	(Voltage) The potential of a metal surface necessary to decompose the electrolyte of a cell or a component/substance thereof.
	DEEP GROUNDBED	One or more anodes installed vertically at a nominal depth of 15 m (50 ft) or more below the earth's surface in a drilled hole for the purpose of supplying cathodic protection for an underground or submerged metallic structure.
	DELTA FERRITE	(1) A solid solution of one or more elements in body-centered cubic iron. Unless otherwise designated (for instance, as chromium ferrite), the solute is generally assumed to be carbon. On some equilibrium diagrams, there are two ferrite regions separated by an austenite area. The lower area is alpha ferrite; the upper, delta ferrite. If there is no designation, alpha ferrite is assumed. (2) ln the held of magnetics, substances having the general formula: M2+O . M,23+O3, the trivalent metal often being iron.
	DEMINERALIZATION	Removal of dissolved mineral matter, generally from water.
	DENDRITE	A crystal that has a treelike branching pattern, being most evident in cast metals, slowly cooled through the solidification range.
	DENICKELIFICATION	Corrosion in which nickel is selectively leached from nickel-containing alloys. Most commonly observed in copper-nickel alloys after extended service in fresh water.
	DENSITY OF GASAS	The mass of a unit volume of a gas at a stated temperature and pressure.
	DENSITY OF SOLIDS/LIQUIDS	The mass of unit volume of a material at a specified temperature.
	DEOXIDIZING	(1) The removal of oxygen from molten metals by use of suitable deoxidizers. (2) Sometimes refers to the removal of undesirable elements other than oxygen by the introduction of elements or compounds that readily react with them. (3) In metal finishing. the removal of oxide films from metal surfaces by chemical or electrochemical reaction.
	DEPOLARIZATION	A decrease in the polarization of an electrode; the elimination or reduction of polarization by physical or chemical means; depolarization results in increased corrosion.
	DEPOLARIZER	A substance that produces depolarization.
	DEPOSIT	Foreign substance which comes from the environment, adhering to a surface of a material.
	DEPOSIT ATTACK	Pitting corrosion resulting from deposits on a metal surface which cause concentration cells.
	DEPOSIT CORROSION	Corrosion occurring under or around a discontinuous deposit on a metallic surface. Also called poultice corrosion.
	DESCALING	Removing the thick layer of oxides formed on some metals at elevated temperatures.
	DEZINCIFICATION	Corrosion in which zinc is selectively leached from zinc-containing alloys. Most commonly found in copper-zinc alloys containing less than 85% copper after extended service in water containing dissolved oxygen. See also dealloying and selective leaching.
	DICHROMATE TREATMENT	A chromate conversion coating produced on magnesium alloys in a boiling solution of sodium dichromate.
	DIELECTRIC SHIELD	In a cathodic protection system, an electrically nonconductive material, such as a coating, plastic sheet, or pipe, that is placed between an anode and an adjacent cathode to avoid current wastage and to improve current distribution, usually on the cathode.
	DIFFERENTIAL AERATION CELL	An electrolytic cell, the electromotive force of which is due to a difference in air (oxygen) concentration at one electrode as compared with that at another electrode of the same material. See also concentration cell.
	DIFFUSION	(1) Spreading of a constituent in a gas, liquid, or solid, tending to make the composition of all parts uniform. (2) The spontaneous movement of atoms or molecules to new sites within a material.
	DIFFUSION COATING	Any process whereby a base metal or alloy is either (1) coated with another metal or alloy and heated to a sufficient temperature in a suitable environment or (2) exposed to a gaseous or liquid medium containing the other metal or alloy. thus causing diffusion of the coating or of the other metal or alloy into the base metal with resultant changes in the composition and properties of its surface.
	DIFFUSION COEFFICIENT	A factor of proportionality representing the amount of substance diffusing across a unit area through a unit concentration gradient in unit time.
	DIFFUSION LIMITED CURRENT DENSITY	The current density, often referred to as limiting current density, that corresponds to the maximum transfer rate that a particular species can sustain because of the limitation of diffusion.
	DIMPLE RUPTURE	A fractographic term describing ductile fracture that occurs through the formation and coalescence of microvoids along the fracture path. The fracture surface of such a ductile fracture appears dimpled when observed at high magnification and usually is most clearly resolved when viewed in a scanning electron microscope.
	DISBONDMENT	The destruction of adhesion between a coating and the surface coated.
	DISCONTINUITY	Any interruption in the normal physical structure or configuration of a part, such as cracks, laps, seams, inclusions, or porosity. A discontinuity may or may not affect the usefulness of the part.
	DISLOCATION	A linear imperfection in a crystalline array of atoms. Two basic types are recognized: (1) an edge dislocation corresponds to the row of mismatched atoms along the edge formed by an extra. partial plane of atoms within the body of a crystal; (2) a screw dislocation corresponds to the axis of a spiral structure in a crystal, characterized by a distortion that joins normally parallel planes together to form a continuous helical ramp (with a pitch of one interplanar distance) winding about the dislocation. Most prevalent is the so-called mixed dislocation, which is any combination of an edge dislocation and a screw dislocation.
	DOUBLE LAYER	The interface between an electrode or a suspended particle and an electrolyte created by charge-charge interaction (charge separation) leading to an alignment of oppositely charged ions at the surface of the electrode or particle. The simplest model is represented by a parallel plate condenser of 2 x 10-8 cm in thickness. In general the electrode will be positively charged with respect to the solution.
	DRAINAGE	Conduction of electric current from an underground metallic structure by means of a metallic conductor. Forced drainage is that applied to underground metallic structures by means of an applied electromotive force or sacrificial anode. Natural drainage is that from an underground structure to a more negative (more anodic) structure. such as the negative bus of a trolley substation.
	DRY CORROSION	Corrosion with gas as the only corrosive agent and without any aqueous phase on the surface of the metal.
	DRYING OIL	An oil capable of conversion from a liquid to a solid by slow reaction with oxygen in the air.
	DUCTILE FRACTURE	Fracture characterized by tearing of metal accompanied by appreciable gross plastic deformation and expenditure of considerable energy. Contrast with brittle fracture.
	DUCTILITY	The ability of a material to deform plastically without fracturing. measured by elongation or reduction of area in a tensile test, by height of cupping in an Erichsen test, or by other means.
	DUMMY CATHODE	(1) A cathode, usually corrugated to give variable current densities, that is plated at low current densities to preferentially remove impurities from a plating solution. (2) A substitute cathode that is used during adjustment of operating conditions.
	DUMMYING	Plating with dummy cathodes.
	DYNAMIC EQUILIBRIUM	The condition of an electrode when the rate of anodic dissolution just balances the rate of cathodic plating.

	A \| B \| C \| D \| E \| F \| G \| H \| I \| J \| K \| L \| M \| N \| O \| P \| Q \| R \| S \| T \| U \| V \| W \| X \| Y \| Z

CLICK HERE TO RECEIVE A FREE CORROSION TEST KIT

RG-2400 STOPS CORROSION - PERIOD.
"WHEN IT'S BLUE YOU'RE THROUGH!"